North Shore Jeeps
Time to get the Jeep dirty! Register or log in to join the fun. If you don't, it's really your loss. There are good, knowledgeable people here. Some odd ones too, but most are o.k....

Rear Bucket Seat Fabrication

View previous topic View next topic Go down

Rear Bucket Seat Fabrication

Post  Ryan McKee on 4/28/2012, 9:31 am

So Jarret and I have been discussing for months the necessary parts to build him a rear seating arrangement comprised of 2 bucket seats instead of the bench. Reason being is that he wants to bring his kids in the Jeep without worrying about the backlash in an emergency/accident situation since there is no neck support. The build that we're going to be following was done by a man previously, but also was recently popped up again on JeepForum from another guy that did the same thing but with one seat. Here's the original write up: http://www.jeepforum.com/forum/f9/tj-w-rear-oem-bucket-seats-747247/

Figured I'd post this here, as we'll probably get started on it this summer!

The guys from JF:











_________________
Ryan, NSJ Club President - 781.632.3864
Built '99 TJ on 35s - My JeepForum Build Thread


All liability at North Shore Jeeps events is your own. You are attending/driving/observing at your own risk. You are solely responsible for yourself, your passengers, and your vehicle.
avatar
Ryan McKee
Admin

Posts : 1242
Join date : 2011-12-09
Location : Reading, MA

http://www.fellswaymedia.com

Back to top Go down

Re: Rear Bucket Seat Fabrication

Post  CrawlingForward on 3/20/2013, 3:54 pm

Anything ever become of this?

_________________
95 YJ, 2" BDS w/ 1" shackle lift, 235/85/16 BFG ATs on Cherokee Icon wheels, SYE w/ Tom Woods Driveshaft, 4.88 Ford 8.8, locked/locked
2010 JK Unlimited, Islander Edition

My JeepForum build

Building a Jeep is like masturbating on pain killers. You enjoy the time you put in, but you'll never actually finish.
avatar
CrawlingForward
Moab Dessert

Posts : 822
Join date : 2011-12-09
Age : 32
Location : Flushing, MI

http://www.geoffreymarsh.com

Back to top Go down

Re: Rear Bucket Seat Fabrication

Post  JaFra on 3/21/2013, 9:22 pm

Not yet. Hopefully this spring.

_________________
2007 JKU X in Steel Blue
33x16 BFG A/Ts on MKW M84's
Stubby antenna
that's about it, so far.


I still miss the old girl


JaFraDesign.com for all of your graphic and web design needs.
avatar
JaFra
Admin

Posts : 186
Join date : 2011-12-06
Age : 43
Location : Lowell, MA

http://www.jafradesign.com

Back to top Go down

Re: Rear Bucket Seat Fabrication

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum