North Shore Jeeps
Time to get the Jeep dirty! Register or log in to join the fun. If you don't, it's really your loss. There are good, knowledgeable people here. Some odd ones too, but most are o.k....

tapered hole punch for sheet metal

View previous topic View next topic Go down

tapered hole punch for sheet metal

Post  Mark on 2/12/2013, 12:15 pm

Any body have a 1 1/2 inch or so tapered hole punch that I might be able to borrow or rent , borrow sounds better. Greenlee brand maybe ?
Going to put holes in the side of my TJ hood and install screen behind it.

SOMEONE,,, ANYONE.
avatar
Mark
Rubicon Trail

Posts : 1298
Join date : 2011-12-10
Location : Haverhill, MA

Back to top Go down

Re: tapered hole punch for sheet metal

Post  KiloTango on 6/24/2013, 7:46 pm

Mark,
I got a bunch of Greenlee punches. 3/4" , 7/8", 1 1/8", 1 1/4". You can come by and see what I got, borrow what you need. Biggest one I have is 1 1/4" the one I use for installing firewall boots

KT
avatar
KiloTango
Daily Driver

Posts : 41
Join date : 2012-01-29
Age : 60
Location : Rowley, MA

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum