North Shore Jeeps
Time to get the Jeep dirty! Register or log in to join the fun. If you don't, it's really your loss. There are good, knowledgeable people here. Some odd ones too, but most are o.k....

custom high line tube flares

View previous topic View next topic Go down

custom high line tube flares

Post  bigmike on 10/11/2013, 12:12 pm

So since im goin highline im debating on going with stock suspension and leave the 1inch mml and bl and work my way up to 35s just a thought.  I have a 2inc lift in now bt 31 s will look a little wierd 33s are coming after the wedding. I will be asking on sizes when the time comes bfgoodrich km2 all the way. Dont hesitate to chime in on this minor dilemma
avatar
bigmike
Mall Crawler

Posts : 72
Join date : 2013-05-05
Age : 35
Location : woburn

Back to top Go down

Re: custom high line tube flares

Post  Mark on 10/11/2013, 12:26 pm

The intended reason for installing those fenders is so that you keep the center of gravity low and go with a small lift, that way you can run 35s.



What happened here, it posted twice?


Last edited by Mark on 10/11/2013, 1:09 pm; edited 1 time in total
avatar
Mark
Rubicon Trail

Posts : 1298
Join date : 2011-12-10
Location : Haverhill, MA

Back to top Go down

Re: custom high line tube flares

Post  janesy on 10/11/2013, 1:01 pm

Here is mine on 33" KM2's with a 2" suspension lift and 1" BL. A bit monster truckish.






Had to get 35's within a couple weeks... And I could still pull off 37's if I wanted.





avatar
janesy
Rausch Creek

Posts : 330
Join date : 2012-04-03
Age : 31
Location : Beverly, MA

Back to top Go down

Re: custom high line tube flares

Post  Mark on 10/11/2013, 1:08 pm

Thats what I was talking about, THANK'S .
avatar
Mark
Rubicon Trail

Posts : 1298
Join date : 2011-12-10
Location : Haverhill, MA

Back to top Go down

high line tube flares

Post  bigmike on 10/11/2013, 3:06 pm

My bad wasnt paying attention when posting. I love your rig tho im hoping to be 35 next year but doubt it. The axle cost situation sucks but a little at a time.
avatar
bigmike
Mall Crawler

Posts : 72
Join date : 2013-05-05
Age : 35
Location : woburn

Back to top Go down

Re: custom high line tube flares

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum