New to the Group
3 posters
Page 1 of 1
New to the Group
Hello all,
I am new to the group. My name is Edgar Mendoza. I am from Revere, MA just trying to find a group that does wheeling. Haven't been wheeling ever, but I finally upgraded my 2000 Wrangler Sahara so I am anxious to start. Currently sitting on 33's with a 3" lift. I heard about this group through JOM on Facebook. But as you all know most of those fellas are way out in West Mass. Hope to see and get to meet some of you soon.
Thanks,
Edgar
I am new to the group. My name is Edgar Mendoza. I am from Revere, MA just trying to find a group that does wheeling. Haven't been wheeling ever, but I finally upgraded my 2000 Wrangler Sahara so I am anxious to start. Currently sitting on 33's with a 3" lift. I heard about this group through JOM on Facebook. But as you all know most of those fellas are way out in West Mass. Hope to see and get to meet some of you soon.
Thanks,
Edgar
EdgarMendoza- Daily Driver
- Posts : 6
Join date : 2015-12-10
Age : 32
Location : Revere, MA
Re: New to the Group
Welcome Edgar
I had an '01 sahara, I hope yours doesn't have nearly as much rust as mine did haha
Any pics? Any future build plans?
I had an '01 sahara, I hope yours doesn't have nearly as much rust as mine did haha
Any pics? Any future build plans?
Tonellin- Rausch Creek
- Posts : 313
Join date : 2013-01-08
Location : Medford
Re: New to the Group
Thanks! Yes she doesnt have bad rust being a 2000 and all. Just surface rust mostly. Previous owner took good care of her.
Right now she sits on:
33" ProComp MT2
3" BDS Suspension
FOX Shocks
JKS Quick Disconnects
For the future plan: Upgrade rear bumper, Rear drums, Tie Rods, Track Bars, Axles, Coat the frame, maybe engine swap.
Pretty proud of the transformation so far.
As for a pic I honestly have no idea how to post them on here haha I apologize.
Right now she sits on:
33" ProComp MT2
3" BDS Suspension
FOX Shocks
JKS Quick Disconnects
For the future plan: Upgrade rear bumper, Rear drums, Tie Rods, Track Bars, Axles, Coat the frame, maybe engine swap.
Pretty proud of the transformation so far.
As for a pic I honestly have no idea how to post them on here haha I apologize.
EdgarMendoza- Daily Driver
- Posts : 6
Join date : 2015-12-10
Age : 32
Location : Revere, MA
Re: New to the Group
Awesome man sounds like a hell of a platform to build on. I've got the same BDS 3" springs but wish I had the fox shocks haha
Tonellin- Rausch Creek
- Posts : 313
Join date : 2013-01-08
Location : Medford
Re: New to the Group
haha Great! Yea they were only a couple a few hundred extra so I said wth instead of upgrading later. I see you are form Medford, I work there off of Broadway. I'll keep a lookout for your Jeep. Mines White.
EdgarMendoza- Daily Driver
- Posts : 6
Join date : 2015-12-10
Age : 32
Location : Revere, MA
Re: New to the Group
I'll keep my eyes peeled - I live right on Marion st. If you're ever looking for somewhere to wrench shoot me a message I'm always down to help a fellow jeeper/NSJ member
Tonellin- Rausch Creek
- Posts : 313
Join date : 2013-01-08
Location : Medford
Re: New to the Group
Cool. Thanks a lot. Will keep that in mind. Im on Winchester St. behind Nardone Electric if you've heard of them.
EdgarMendoza- Daily Driver
- Posts : 6
Join date : 2015-12-10
Age : 32
Location : Revere, MA
Re: New to the Group
That's funny I probably drive by there 5-6x a day but usually in my little beater car. I rented on Winchester for a couple years before buying my house on Marion - good area
Tonellin- Rausch Creek
- Posts : 313
Join date : 2013-01-08
Location : Medford
Re: New to the Group
Haha funny. Yea I park at the rear so it is pretty hard to spot. Hopefully I spot you or vice versa.
EdgarMendoza- Daily Driver
- Posts : 6
Join date : 2015-12-10
Age : 32
Location : Revere, MA
Similar topics
» New to the group
» New to the group
» Facebook group
» 2nd Amendment Group
» New to the group from Canton
» New to the group
» Facebook group
» 2nd Amendment Group
» New to the group from Canton
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|