North Shore Jeeps
Time to get the Jeep dirty! Register or log in to join the fun. If you don't, it's really your loss. There are good, knowledgeable people here. Some odd ones too, but most are o.k....

Join the forum, it's quick and easy

North Shore Jeeps
Time to get the Jeep dirty! Register or log in to join the fun. If you don't, it's really your loss. There are good, knowledgeable people here. Some odd ones too, but most are o.k....
North Shore Jeeps
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Tooling for shop press

Go down

Tooling for shop press Empty Tooling for shop press

Post  Mark 12/21/2012, 12:20 pm

Looking for tooling for shop press, steel plates, bearing separators etc
, let me know what you have.
Mark
Mark
Rubicon Trail

Posts : 1300
Join date : 2011-12-10
Location : Haverhill, MA

Back to top Go down

Tooling for shop press Empty Re: Tooling for shop press

Post  Rob Cote 12/26/2012, 8:45 am

Mark,

Harbor Freight sells a bearing press kit for ~$80. You could pick one of those up and use it for the plates and rings. It would be a breeze to use with a press instead of the threaded rod and nut they supply. Just a thought. bom
Rob Cote
Rob Cote
Moab Dessert

Posts : 673
Join date : 2012-07-11
Age : 33
Location : Ipswich, MA

Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum